Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty

Renishaw_SP25M_CMM_Scanning_Probe_Kit_2_New_in_Box_with_One_Year_Warranty_01_mo Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty

Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty
Ram Optical and OGP. CMM and VMM Probing Systems. Machine Tool Probing Systems. Video Measuring Machine Parts. Profile Surface and Roundness. The SP25M comprises two sensors in a single housing. Users can switch between a choice of four scanning modules (which can carry M3 styli with lengths from 20 mm to 400 mm) and an adaptor module that is compatible with Renishaw’s TP20 range of probe modules. This capability enables scanning and touch-trigger probing in a single probe system. The SP25M’s compact size and autojoint mounting makes it compatible with the PH10M/MQ and PH6M probe heads. It can also be mounted on a multiwired extension bar. Together, these combinations permit excellent reach and access to part features. For details of the technology in SP25M, refer to the SP25M Technical Paper. World’s smallest scanning probe at only 25 mm in diameter. Excellent metrology – isolated optical sensing and 3rd order polynomial compensation. Four modules provide optimal performance across a range of stylus lengths (up to 400 mm). Two sensors in one – scanning and touch-trigger. Crash protection and simple stylus changing. Fast and simple probe calibration cycle. Ideal for profile and form measurement. Suitable for use on motorised indexing heads for greater flexibility and shorter scanning cycle times. Simple and robust design for greater reliability – no motors or locking mechanisms. Renishaw autojoint : PH10M, PH10MQ or PH6M May be mounted on autojoint extension bars. Either: UCC controller Or: AC3 PC interface card for machines not fitted with the UCC controller. 3-axis analogue measurement (X, Y, Z) Pivoting motion in XY plane with translation in Z direction. For SM25-5: Plane translation in all 3 axes XYZ. ±0.5 mm (±0.02 in) in X, Y and Z. For SM25-5: ±0.3 mm. ±2.0 mm (±0.08 in) in X and Y 1.7 mm (0.07 in) in +Z 1.2 mm (0.07 in) in -Z. For SM25-5: ±X, ±Y = 0.95 mm (0.037 in) +Z = 1.0 mm (0.039 in) -Z = 1.1 mm (0.043 in). X, Y, -Z – break-off of either module or stylus holder +Z – integral bump-stop design. 0.2 N/mm to 0.6 N/mm nominal dependent on stylus length. Single viscous fluid damper. For SM25-5: Two viscous fluid dampers. +12 V (±5%), -12 V (+10% / -8%), +5 V (+10% / -13%) DC at probe. Outputs (X, Y, Z). Non-linear and non-orthogonal analogue outputs – rate, gain and resolution are not fixed SP25M requires that a non-linear, third-order polynomial calibration method is used. SP25M modules and stylus holders. A range of module kits allows SP25M users to build up their probing capability over time. Each SM25-# scanning module is optimised in terms of gain and spring rate to suit the range of stylus lengths specified. For every module, there is a matching SH25-# stylus holder. The SH25-3 and SH25-4 stylus holders are constructed with a fixed carbon fibre stem to which an M3 stylus is mounted, selected to provide the correct working length. Whilst the SP25M can carry cranked (non straight) styli configurations when using SM25-1/2/3/4 scanning modules and the original standard stylus holders (SH25-1/2/3/4) but for optimum metrology where larger offsets are required Renishaw recommends the new SH25-2A/3A/4A range of stylus holder, specifically designed to meet the challenges posed by such stylus arrangements. TM25-20 TTP adaptor module. Stylus length: 20 – 50 mm. Stylus length: 50 – 105 mm. Stylus length: 120 – 200 mm. Stylus length: 220 – 400 mm. Use with TP20 touch-trigger modules and extensions. Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw needs. With 35 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support. On behalf of Metrology Parts, we would like to thank you in advance for the opportunity to earn your business. Add to Favorite Sellers. Sign up to Newsletter. View more great items. $3,250.00. $2,680.00. This listing is currently undergoing maintenance, we apologise for any inconvenience c. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Inspection & Measurement\CMM Machines & Comparators”. The seller is “metrologyparts” and is located in this country: US. This item can be shipped worldwide.
  • Model: SM25M Scanning Probe Kit 2
  • Country/Region of Manufacture: United Kingdom
  • Country of Manufacture: United Kingdom
  • Renishaw: CMM
  • MPN: A-2237-1002
  • Brand: Renishaw

Renishaw SP25M CMM Scanning Probe Kit 2 New in Box with One Year Warranty

Comments are closed.